測試測試EN
TERTEC’s Guanyin Safety and EMC Testing Laboratory has obtained the smart home device interconnection protocol test has been recognized by the National Certification Foundation (TAF) and the Taiwan Smart Energy Industry Association (TaiSEIA).
Added outdoor high-voltage switchboard weather test (weather proof test) service.
Enable MW level smart converter detection service.
Established the “Chemical and Material Testing Lab” and accredited by TAF.
Greenhouse gas verification (VPC) qualifications for "non-renewable energy" and "energy transmission and distribution" industries added.
Established the “Smart Energy Devices Testing Department”.
Adds “ electric vehicle charging equipment” testing services and factory inspections services.
Electric vehicles power supply equipment(EVSE) measurement verification service.
Strategic cooperation between TERTEC and UL Solutions to facilitate the layout of green energy.
Launch of the official Line account.
Obtained the qualification of "Greenhouse Gas Verification Organization".
Added the verification scope of "Offshore Wind Farm Project Verification-Submarine Cable (Supervision of Manufacturing)" accredited by TAF.
The Renewable Energy Laboratory was accredited by TAF and became a designated laboratory of the Bureau of Standards, Metrology and Inspection, MOEA.
Accreditation has approved by MOEA. and TAF about Charging system equipment and batter exchange equipment of electric motorcycle implement Commodity Inspection.
TERTEC’s Guanyin Safety and EMC Testing Laboratory has obtained IECEE CBTL(under NCB: JET Japan) certification
TERTEC’s Penghu Wind Turbine Testing Laboratory has been registered as a designated laboratory by Bureau of Standards, Metrology and Inspection, MOEA.
Under the witness of the Bureau of Standards and Inspection, signed the Taiwan Offshore Wind Power Project Verification Alliance with MIRDC, SOIC and CR.
Undertook “Standard, testing and certification of the MW level smart inverter and photovoltaic module” and “Project certification of offshore substation of power system design and power quality” projects of Bureau of Standards, Metrology and Inspection, MOEA.
Accredited in respect of Renewable Energy (Solar) Power Generation Equipment Field Inspection, Factory Inspection Body by TAF.
Undertook “Performance Enhancement and Counseling Project for Smart Vehicles and critical Components” of Automotive Research & Testing Center.
Signed “Offshore wind turbine third-party certification memorandum of cooperation” with ABSG Consulting Inc., Northland Power Inc., Copenhagen Offshore Partners, Zhufeng Power, The Power Generation Co., Ltd., and YuShan Energy.
Signed “Wind energy industry testing and certification memorandum of cooperation” with National Renewable Energy Center of Spain and the DNV GL Netherlands’ B.V. Laboratory.
Signed “Off-shore wind energy submarine cable testing and certification memorandum of cooperation” with NKT Cables.
Signed “Development of off-shore wind power fields memorandum of cooperation” with WPD Energy Company and DNV GL Business Assurance Co., Ltd.
Accredited in respect of ISO/IEC 17021, Quality Management Systems Certification Work by Bureau of Standards, Metrology and Inspection, MOEA.
Signed “Wind energy industry memorandum of cooperation” with GMC, DEWI, LOC, TÜV SUD, DNV GL, SGS etc.
Completed installation and launching of 10 meter semi-anechoic chamber for EMC testing of electrical appliances.
Signed “Testing and verification of hydrogen energy vehicles and the application technology memorandum of cooperation” with CSA Canada.
Completed installation and launching of RoHS testing laboratory, and explosion proof testing equipment for electrical appliances.
Undertook “Industry technology consultancy and promotion for smart electric vehicles project” of Automotive Research & Testing Center.
Signed “International certification laboratory for fuel cells memorandum of cooperation” with Intertek.
Approved by TÜV Germany for testing of electric vehicle charging system.
Launched VRF air conditioner and heat pump water heater testing laboratory.
Signed “LED street lamp certification and testing cooperative agreement” with Chinese Quality Certification Center (CQC) China.
Signed “Testing for small and medium-sized wind turbines memorandum of cooperation” with DNV and the Class NK Association Japan.
Photovoltaic module testing laboratory approved by the International Electrotechnical Commission as an IECEE CBTL.
Completed establishment and launching of the gonio-colorimeter and photobiological safety measurement equipment for lighting products.
Approved by JET Japan for LED lighting product inspection and solar reference cell calibration.
Approved by UL SAE J1772 for inverter and power conditioner testing.
Completed establishment and launching of the first automation equipment for the 20 kVA renewable energy power conditioner testing.
Approved by JET Japan for lighting product testing and reference solar cell calibration.
Signed “Critical components of electric vehicles testing memorandum of cooperation” with UL.
Undertook “Methodology testing technology of advanced electricity meter research project” of Bureau of Standards, Metrology and Inspection, MOEA.
Approved by TUV NORD and CGC China for photovoltaic module testing.
Undertook “Research and enhancement of the energy efficiency standard for electrical devices and the implementation of after-market management system research project” of Industrial Technology Research Institute.
Undertook “Testing and certification platform establishment project for wind power generation and photovoltaic system standards” of Bureau of Standards, Metrology and Inspection, MOEA.
Completed establishment and launching of the photovoltaic module safety and performance testing lab.
Signed “Photovoltaic module and solar cell testing memorandum of cooperation” with SGS.
Signed “Inverter/convertor laboratory establishment and renewable energy testing memorandum of cooperation” with UL.
MOEA published “Dehumidifier energy efficiency standards” based on TERTEC’s research results.
Undertook “Standards of recycling energy products, safety and performance testing technology early-stage research and induction project” of Bureau of Standards, Metrology and Inspection, MOEA.
Assisted Bureau of Energy in promoting the “Replacement program of incandescent lamps 585” and stipulated the “energy efficiency standard of incandescent lamps.”
MOEA published “Compact fluorescent lamp and self-ballasted fluorescent lamp energy efficiency standards” based on the TERTEC’s research results.
MOEA published “air conditioner, refrigerator, and ballast of fluorescent lamp energy efficiency standards” based on the TERTEC’s research results.
Accredited in respect of ISO/IEC Guide 65, Product Certification Work by Bureau of Standards, Metrology and Inspection, MOEA.
Signed “Electrical products testing memorandum of cooperation” with VDE Germany.
Accredited in respect of ISO/IEC 17020, Factory Inspection Body by Bureau of Standards, Metrology and Inspection, MOEA.
Undertook “Intermediate and long-term energy efficiency standards upgrade research project for electrical appliances” of Bureau of Energy.
Listed as JET Japan’s certified lab for “Direct current supply and small transformer testing.”
Moved headquarters to No. 6-6, Ronggong S. Rd., Guanyin Dist., Taoyuan City.
JET Japan commissioned TERTEC to handle the consultancy and assistance affairs of PSE and S-JET certification application for products exporting to Japan.
Signed “Technological exchange agreement” with Xian High Voltage Apparatus Research Institute Co., Ltd.
Moved headquarters to Taiwan Technology Headquarters building, 12 F and 13 F, No. 190 and No. 192, Section 2, Zhongxing Rd., Xindian City.
Signed “Technological cooperation agreement” with JET Japan and CESI Italy respectively.
Undertook the technology project- “Electrical equipment testing technology development research” of Ministry of Economic Affairs.
Signed “Technological cooperation agreement” with KEMA Netherlands.
Undertook the program- “Energy Consumption Testing and Management Research on the Electrical Devices” of Energy Commission, Ministry of Economic Affairs.
Ministry of Economic Affairs revised “Window-type and floor standing air conditioner EER standards” based on TERTEC’s research results.
Bureau of Standards, Metrology and Inspection, MOEA commissioned TERTEC to undertake electricity meter verification program.
Ministry of Economic Affairs published “Floor standing air conditioner EER standards” based on TERTEC’s research results.
Ministry of Economic Affairs published “Window-type air conditioner EER standards” based on TERTEC’s research results.
TERTEC has been officially established.
Founded with the approval of Ministry of Economic Affairs.